(8.D.2.6) ShiftSamples
- Catherine Spain
Overview
Shifts the samples in a block of data left or right a specified number of samples
Discussion
This module shifts the data in a block of data a specified number of samples left or right. The blockSize of the output pin is the equal to the blockSize of the input pin. Zeros are shifted in and samples are dropped, as necessary. This module is typically used with frequency domain data to shift spectra up or down in frequency. The module operates on multichannel signals and the same shifting operation is applied to each channel.
The parameter, index specifies the number of values to be shifted. The index is zero based, and must lie in the range of [-blockSize+1 blockSize-1]. If index is outside of the allowable range, it is clipped to the ends of the buffers. Negative values of index cause the data to be shifted down in time, and positive values of index cause the data to be shifted up in time.
Type Definition
typedef struct _ModuleShiftSamples
{
ModuleInstanceDescriptor instance; // Common Audio Weaver module instance structure
INT32 index; // Specifies the number of values to be shifted.
} ModuleShiftSamplesClass;Variables
Properties
Name | Type | Usage | isHidden | Default value | Range | Units |
index | int | parameter | 0 | 0 | -31:31 |
|
Pins
Input Pins
Name: in
Description: Input signal
Data type: {float, int, fract32}
Channel range: Unrestricted
Block size range: Unrestricted
Sample rate range: Unrestricted
Complex support: Real and Complex
Output Pins
Name: out
Description: Output signal
Data type: {float, int, fract32}
MATLAB Usage
File Name: shift_samples_module.m
M=shift_samples_module(NAME)
Creates a shift samples module for use in the Audio Weaver environment.
This module shifts the bins of one or more channels of the input by an
integer number of bins up or down and places the shifted spectra into the
channels of the output.
Positive shift values correspond to shifting “up” (bins move to
higher-frequency locations), and negative value correspond to shifting
“down”.
Arguments:
NAME - name of the module.
The input and output must have the same number of channels.