Overview

Checks if the input signal levels are within a specified upper and lower range.

Discussion

This module determines if the input signal falls within a specified range. The range is specified by the instance variables .lower and .upper. An input sample falls within the range if (in[i] >= .lower) && (in[i] <= .upper). The instance variable .withinRange is set to 1 if all of the input samples are within range. If one or more input samples are outside of the allowable range, then .withinRange is set to 0.

Type Definition

typedef struct _ModuleWithinRange
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    FLOAT32 lower;                                // Lower edge of the allowable range.
    FLOAT32 upper;                                // Upper edge of the allowable range.
    INT32 withinRange;                            // Equals 1 if all input samples in the block are within range. Otherwise equals 0.
    INT32 outputValue;                            // Specifies the behavior of the output pin.
} ModuleWithinRangeClass;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
lower	float	parameter	0	-0.5	-1:1
upper	float	parameter	0	0.5	-1:1
withinRange	int	state	0	0	Unrestricted
outputValue	int	const	0	1	Unrestricted

Pins

Input Pins

Name: in

Description: audio input

Data type: float

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real

Output Pins

Name: out

Description: Boolean

Data type: int

MATLAB Usage

File Name: within_range_module.m

 M=within_range_module(NAME, OUTPUTVALUE)
 This module determines if the input signal falls within a specified
 range [.lower .upper]. The module sets an internal Boolean variable
 .withinRange to 1 if (input >= .lower) and (input <= .upper).
 If the input signal is not within the allowable range, then .withinRange
 is set to 0.  
 
 Arguments:
    NAME - name of the module.
    OUTPUTVALUE - specifies the behavior of the module's output pin, if any. 
         OUTPUTVALUE=0, then the module does not have an output pin.
         OUTPUTVALUE=1, then the output pin has size [1x1] and contains 
              the variable .withinRange. 
         OUTPUTVALUE=2, then the output pin is the same dimension as the
              input pin and contains a sample-by-sample Boolean value.  
              By default, OUTPUTVALUE=0.
 
 The variable .withinRange is set based on whether all samples in the
 input pin are within the allowable range.

Documentation Hub [PUBLIC]

(8.D.2.2) WithinRange