(8.D.2.2) Meter
Overview
Peak and RMS meter module
Discussion
This modules provides a flexible level meter that can operate in several modules. The module has a single multichannel input and separately meters each channel. The meter can be configured to conform to IEC 60280-10 (peak meters) and IEC 60280-17 (VU Meter) specifications. The meterType parameter is used to configure the module as follows.
If meterType=0, then the meter implements a peak meter according to IEC 60280-10 in "fast mode". The attackTime is fixed at 5 msec and the release time is fixed to 1087 msec.
If meterType=1, then the meter implements a peak meter according to IEC 60280-10 in "slow mode". The attackTime is fixed at 10 msec and the release time is fixed to 1450 msec.
If meterType=2, then the meter implements a meter according to IEC 60280-17. This corresponds to the industry standard "VU meter" definition. The attack and release times are 65 msec.
If meterType=3, then the meter implements a custom peak meter. You have to manually set the attackTime and releaseTime from a Matlab script.
If meterType=4, then the meter is instantaneous and has attack and release times of 0 msec. The meter value equals the last value in each block.
If meterType=16, then the meter implements a computationally cheap approximation to IEC 60280-10 in "fast mode". The attackTime is fixed at 5 msec and the release time is fixed to 1087 msec.
If meterType=17, then the meter implements a computationally cheap approximation to IEC 60280-10 in "slow mode". The attackTime is fixed at 10 msec and the release time is fixed to 1450 msec.
If meterType=18, then the meter implements a computationally cheap approximation to IEC 60280-17. This corresponds to the industry standard "VU meter" definition. The attack and release times are 65 msec.
If meterType=19, then the meter implements a custom peak meter in a computationally fast manner. You have to manually set the attackTime and releaseTime from a Matlab script.
If meterType=20, then the meter implements an instantaneous peak meter. The attack and decay times are zero. Basically, the max abs value of each block is returned for each block without time constants.
In meterTypes 0 to 4, the peak attack and release are performed on a sample-by-sample basis in the envelope follower. In meterTypes 16 to 20, the peak absolute value for the entire input block is found and this one value is passed through the envelope follower.
Type Definition
typedef struct _ModuleMeter
{
ModuleInstanceDescriptor instance; // Common Audio Weaver module instance structure
INT32 meterType; // Operating mode of the meter. Selects between peak and RMS calculations. See the discussion section for more details.
FLOAT32 attackTime; // Attack time of the meter. Specifies how quickly the meter value rises.
FLOAT32 releaseTime; // Release time of the meter. Specifies how quickly the meter decays.
FLOAT32 attackCoeff; // Internal coefficient that realizes the attack time.
FLOAT32 releaseCoeff; // Internal coefficient that realizes the release time.
FLOAT32* value; // Array of meter output values, one per channel.
} ModuleMeterClass;
Variables
Properties
Name | Type | Usage | isHidden | Default value | Range | Units |
meterType | int | parameter | 0 | 18 | Unrestricted | Â |
attackTime | float | derived | 1 | 65 | 0:1000 | msec |
releaseTime | float | derived | 1 | 65 | 0:10000 | msec |
attackCoeff | float | derived | 1 | 0.02336 | Unrestricted | Â |
releaseCoeff | float | derived | 1 | 0.02336 | Unrestricted | Â |
value | float* | state | 0 | [1 x 1] | -60:10 | linear |
Pins
Input Pins
Name: in
Description: audio input
Data type: float
Channel range: Unrestricted
Block size range: Unrestricted
Sample rate range: Unrestricted
Complex support: Real
Scratch Pins
Channel count: 1
Block size: 32
Sample rate: 48000
MATLAB Usage
File Name: meter_module.m
M=meter_module(NAME)
Creates a meter module for use in the Audio Weaver environment.
The module has a single multichannel input pin.
Arguments:
NAME - name of the module.
Â