Document toolboxDocument toolbox

(8.D.2.2 ) SbSplitter

Owned by Catherine Spain
Oct 06, 2023
2 min read

Overview

Subband splitter module

Type Definition

typedef struct _ModuleSbSplitter { ModuleInstanceDescriptor instance; // Common Audio Weaver module instance structure INT32 numOut; // Number of output pins FLOAT32* bandEdges; // Cutoff frequencies between bands, in Hz FLOAT32* transitionWidths; // Width of the transition region between bands (Hz or Octave) FLOAT32* gains; // Internal array of gain factors. Each column represents a different output. } ModuleSbSplitterClass;

Variables

Properties

Name

Type

Usage

isHidden

Default value

Range

Units

numOut

int

const

0

2

Unrestricted

 

bandEdges

float*

parameter

0

[1 x 1]

0:24000

 

transitionWidths

float*

parameter

0

[1 x 1]

0:24000

 

gains

float*

derived

1

[129 x 2]

Unrestricted

 

Pins

Input Pins

Name: in

Description: audio input

Data type: float

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real and Complex

Output Pins

Name: out1

Description: audio output

Data type: float

 

Name: out2

Description: audio output

Data type: float

MATLAB Usage

File Name: sb_splitter_module.m

M = sb_splitter_module(NAME, NUMOUT, FFTSIZE) Creates a module which splits subband data into separate frequency bands. In some sense, it acts like a multiband crossover based on linear gains within each subband. The gains are 1.0 in the center of each band and a cosine window is used for smoothing between bands. The width of the smoothing interval between each pair of bands can be individually set. The module operates on real or complex subband data. Arguments: NAME - name of the module. NUMOUT - number of output bands. By default = 2. FFTSIZE - optional argument which sets the default size of the array. By default, FFTSIZE = 256 and the internal gain arrays have a length of 257. The module's processing function copies the input data to each output pin and applies a linear set of frequency gains. The gains are different for each output pin and the gains are computed by the module's set function.

Â