Overview

Linear multichannel scaler

Discussion

The Scaler module scales multichannel signals by a single gain value. By default, the module has a 1 input and 1 output pin.

The module can also be configured for an arbitrary number of input and output pins. In this case, the ith input pin is scaled and copied to the ith output pin. The same scale factor is used in all cases and the dimensions and sample rate of each signal can be arbitrary

This module is multi-type and supports both floating-point and fract32 audio signals. Note that the module is not smoothly varying. If you update the gain value, you may introduce an audible click. For clickless operation, use the ScalerSmoothedFract32 module instead.

Type Definition

typedef struct _ModuleScalerFract32
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    FLOAT32 gain;                                 // Linear gain
    fract32 f;                                    // Multiplicative gain factor
    INT32 shift;                                  // Number of bits to shift
} ModuleScalerFract32Class;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
gain	float	parameter	0	1	-10:10	linear
f	fract32	derived	1	0.5	Unrestricted
shift	int	derived	1	1	Unrestricted

Pins

Input Pins

Name: in1

Description: Input signal

Data type: fract32

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real and Complex

Output Pins

Name: out1

Description: Output signal