Overview

Source module which periodically outputs an impulse

Discussion

This module has a single mono output pin and generates a periodic impulse of value 1; all other output samples are set to 0. The variable .period specifies the period of the generation process in samples. .period can be adjusted at run-time. If .period = SAMPLERATE, then the module generates an impulse every second. If .period = 1, then the module outputs a DC constant. If .period = 0, then the module stops output values.

As with all source modules, you have to set the blockSize and sampleRate of the output pin. The module is initialized so that it fires immediately; sample 0 of block 0 is set to 1.0f.

Type Definition

typedef struct _ModuleImpulseSourceFract32
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 period;                                 // Period or rate of the impulse generator
    INT32 sampleIndex;                            // Specifies the index of the next non-zero value
} ModuleImpulseSourceFract32Class;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
period	int	parameter	0	48000	0:240000	samples
sampleIndex	int	state	1	0	Unrestricted

Pins

Output Pins

Name: out

Description: audio output

Data type: fract32

MATLAB Usage

File Name: impulse_source_fract32_module.m

 M=impulse_source_fract32_module(NAME, BLOCKSIZE, SAMPLERATE)
 Source module which periodically outputs an impulse.  An impulse is
 a single non-zero sample of value 1.  The period can be adjusted at
 run-time.
 Arguments:
    NAME - name of the module.
    BLOCKSIZE - number of samples per output channel.  By default,
                BLOCKSIZE = 32.
    SAMPLERATE - sample rate of the output signal, in Hz.  By default,
                 SAMPLERATE = 48000.

Documentation Hub [PUBLIC]

(8.D.1.2) ImpulseSourceFract32