Overview

Interpolator combining an upsampler and an FIR filter

Discussion

The FIR interpolator module implements an upsampler (zero stuffer) followed by an FIR filter. An efficient polyphase algorithm is used which reduces the processing load. The module operates on multiple channels with all channels sharing the same set of filter coefficients. The filter coefficients are stored in the array coeffs in normal order. Each channel uses a circular buffer of length N/L, where N is the filter length and L is the interpolation factor.

The output block size equals the input block size multiplied by L. The output sample rate equals the input sample rate multiplied by L.

Type Definition

typedef struct _ModuleFIRInterpolatorFract32
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 L;                                      // Upsampling factor
    INT32 N;                                      // Length of the filter
    INT32 postShift;                              // Number of bits to shift
    INT32 polyphaseLen;                           // Length of each polyphase filter component
    INT32 stateIndex;                             // Index of the oldest state variable in the array of state variables
    INT32 stateLen;                               // Length of the circular state buffer
    FLOAT32* coeffs;                              // Filter coefficient array in normal order
    fract32* coeffsFract32;                       // Filter coefficient fract32 array in normal order
    fract32* state;                               // State variable array. The size of the array equals stateLen * numChannels
} ModuleFIRInterpolatorFract32Class;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
L	int	const	0	2	1:1:512
N	int	const	0	32	1:1:5000	samples
postShift	int	derived	1	0	Unrestricted
polyphaseLen	int	const	1	16	Unrestricted
stateIndex	int	state	1	0	Unrestricted
stateLen	int	const	1	16	Unrestricted
coeffs	float*	parameter	0	[32 x 1]	Unrestricted
coeffsFract32	fract32*	derived	0	[34 x 1]	Unrestricted
state	fract32*	state	1	[16 x 1]	Unrestricted

Pins

Input Pins

Name: in

Description: audio input

Data type: fract32

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real

Output Pins

Name: out

Description: audio output

Data type: fract32

MATLAB Usage

File Name: fir_interpolator_fract32_module.m

 M=fir_interpolator_fract32_module(NAME, L, N)
 Implements an interpolator module which combines an upsampler and
 an FIR filter.  An efficient polyphase algorithm is used to 
 reduce the required computation.  The module has a multichannel
 input pin and a multichannel output pin.  Arguments:
    NAME - name of the module.
    L - interpolator factor.
    N - length of the filter (number of taps).
 Note that due to the way the polyphase filter is implemented, N
 must be a multiple of L.  This is checked by the instantiation
 function.