Overview

Copies the data at the input pin and stores it in an internal buffer

Discussion

This module copies the fract32 data at the input pin to an internal buffer (value). The copy operation occurs at each block process and thus the data continuously updates. This module is used to store the value of a wire and make it available to the control code, or a host processor. The inspector window shows the data using a plot. In the inspector window, there are two edit boxes for maximum(Ymax) and minimum(Ymin) limits for plotting amplitude. If user gives Ymax less than Ymin then the range [Ymax Ymin] will be automatically set by MATLAB

Additionally, this module makes the wire information available as internal variables. Block size, channel number, sample rate and signal complexity can be accessed in MATLAB code, source code, or in a layout using the ParamGet module.

Type Definition

typedef struct _ModuleSinkFract32Properties
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 BlockSize;                              // Block Size
    INT32 NumChannels;                            // Number of Channels
    FLOAT32 SampleRate;                           // Sample Rate
    INT32 IsComplex;                              // Is Complex
    INT32 enable;                                 // To Enable or disable the plotting
    fract32* value;                               // Captured values
    FLOAT32* yRange;                              // Yaxis Range
} ModuleSinkFract32PropertiesClass;

Variables

Properties

Pins

Input Pins

Name: in

Description: audio input

Data type: fract32

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real and Complex

MATLAB Usage

File Name: sink_fract32_properties_module.m

 M=sink_fract32_properties_module(NAME)
 Creates a sink (capture) module for use with the Audio Weaver
 environment.  The module captures a block of fract32 input data and
 stores it into an internal buffer.  Arguments:
    NAME - name of the module
 Copyright 2008.  DSP Concepts, Inc.  All Rights Reserved.
 Author:  Paul Beckmann