Overview

Slew rate limiter

Discussion

Slew rate limiter that restricts the rate of change of a signal. The module computes the derivative of a signal and limits positive values to .maxSlew and minimum values to .minSlew. This mimics slew rate limiting that occurs in analog amplifiers.

The .units variable specifies how .maxSlew and .minSlew should be interpreted.

.units = 0 means that the slew rates are per sample.

.units = 1 means that the slew rates are per millisecond.

.units = 2 means that the slew rates are per second (the default).

Internally, the function uses the hidden variables .maxSlewSample and .minSlewSample does limiting on a sample by sample basis. The module's set function converts from .maxSlew and .minSlew to .maxSlewSample and .minSlewSample based on .units.

The .reset flag forces the output value to match the input value. This temporarily stops slew rate limiting for 1 sample period. By default, .reset=1 when the module is constructed. This causes the module to start in a converged state (no slew limiting on the first sample). Otherwise, if you set .reset=0 before the module is built it causes the module output to start at 0 and apply slew limiting immediately.

Type Definition

typedef struct _ModuleSlewRateLimiter
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 units;                                  // Specifies the units for the minSlew and maxSlew variables (0=sample, 1=msec, 2=sec)
    FLOAT32 minSlew;                              // Minimum allowed slew rate
    FLOAT32 maxSlew;                              // Maximum allowed slew rate
    INT32 reset;                                  // Forces the output to equal the input
    FLOAT32 minSlewSample;                        // Minimum allowed slew rate per sample
    FLOAT32 maxSlewSample;                        // Maximum allowed slew rate per sample
    FLOAT32* state;                               // State variables. One per channel
} ModuleSlewRateLimiterClass;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
units	int	parameter	0	2	0:2
minSlew	float	parameter	0	-100	Unrestricted
maxSlew	float	parameter	0	100	Unrestricted
reset	int	parameter	0	1	Unrestricted
minSlewSample	float	derived	1	-0.002083	Unrestricted
maxSlewSample	float	derived	1	0.002083	Unrestricted
state	float*	state	1	[1 x 1]	Unrestricted

Pins

Input Pins

Name: in

Description: Input signal

Data type: float

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real

Output Pins

Name: out

Description: Output signal