Overview

Table driven interpolation module with set function. Supports linear and smooth modes

Discussion

This module performs table lookup using unevenly spaced X and Y values.

The module supports linear and DSPC interpolation. Internally the interpolation is performed using a piece wise polynomial approximation. With linear interpolation a first order polynomial is used; for 4th order, a polynomial is used. The 4th order interpolation preserves the shape of the function as opposed as overshoots on a spline. This new interpolation method developed by DSP Concepts Inc. developed uses a reduced set of 3 coefficients.

The input to the module serves as the X value in the lookup and the output equals the Y value derived from doing the interpolation. The module is configured by setting the internal matrix .XY. The first row of .XY represents X values and the second row Y values.

At instantiation time you specify the total number of points (MAXPOINTS) in the table. MAXPOINTS determines the amount of memory allocated to the table. Then at run time, you can change the number of points actively used by the table (.numPoints). .numPoints must be less than or equal to MAXPOINTS.

The variable .order specifes either linear (=2) or cubic (=4) interpolation.

The module also provides a custom inspector for easy configuration from the Audio Weaver Designer GUI. The GUI translates the XY table into a piece wise polynomial segments. The matrix .polyCoeffs contains 4 x (MAXPOINT-1) values. Each column represents the coefficients for each polynomial. Row 4 is the X^3 coefficent, row 3 the X^2 coefficient, row 2 the X coefficient and row 1 the constant term.

If the input x falls outside of the range of values in the XY table then the input is clipped to the allowable range.

Type Definition

typedef struct _ModuleTableInterpRuntime
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 maxPoints;                              // Maximum number of values in the lookup table. The total table size is [maxPoints 2].
    INT32 numPoints;                              // Current number of interpolation values in use.
    INT32 order;                                  // Order of the interpolation. This can be either 2 (for linear) or 4 (for pchip).
    INT32 updateActive;                           // Specifies whether the poly coefficients are updating (=1) or fixed (=0).
    FLOAT32* XY;                                  // Samples of the lookup table. The first row is the x values and the second row is the f(x) values
    FLOAT32* polyCoeffs;                          // Interpolation coefficients returned by the grid control
} ModuleTableInterpRuntimeClass;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
maxPoints	int	const	0	8	4:1:1000
numPoints	int	parameter	0	4	4:1:8
order	int	parameter	0	2	2:2:4
updateActive	int	parameter	1	1	0:1
XY	float*	parameter	0	[2 x 8]	Unrestricted
polyCoeffs	float*	state	0	[4 x 7]	Unrestricted

Pins

Input Pins

Name: in

Description: audio input

Data type: float

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real

Output Pins

Name: out

Description: audio output