AWECoreUtils.h

This page is a work in progress. Improvements to content and formatting are underway.

The AWECore Helper Functions File.

#include "ProxyIDs.h"
#include "Errors.h"
#include "TargetProcessor.h"

/*******************************************************************************
 *
 *               AWE Utilities
 *               ---------------
 *
 ********************************************************************************
 *     AWECoreUtils.h
 ********************************************************************************
 *
 *     Description:  AudioWeaver Utilities and Helper Functions
 *
 *     Copyright:    (c) 2007-2021 DSP Concepts, Inc. All rights reserved.
 *                   3235 Kifer Road
 *                   Santa Clara, CA 95054
 *
 *******************************************************************************/
  
 #ifndef AWECOREUTILS_H
 #define AWECOREUTILS_H
  
 #include "ProxyIDs.h"
 #include "Errors.h"
 #include "TargetProcessor.h"
  
 #ifdef  __cplusplus
 extern "C" {
 #endif
  
 /*------------------ PACKET ROUTING MACROS - MULTI-INSTANCE ONLY  ------------------*/
  
 #define PACKET_LENGTH_WORDS(x) (x[0]>>16)
  
 #define PACKET_LENGTH_BYTES(x) ((x[0]>>16) * sizeof(x[0]))
  
 #define PACKET_INSTANCEID(x) (x[0] >> 8) & 0xff
  
 #define PACKET_OPCODE(x) ((INT32)x[0] & 0xffU)
  
 #define AWB_DONE 1
  
 #define AWB_NOT_DONE 0
  
 typedef enum
 {
     /* --- States for receiving a command --- */
  
     tMS_Rx_CmdSTX,          /* Receive Command STX */
     tMS_Rx_CmdSeq,          /* Receive Command Sequence ID */
     tMS_Rx_CmdData,         /* Receive Command Data */
  
     /* --- States for sending a response --- */
     tMS_Tx_RspSTX,          /* Send Response STX */
     tMS_Tx_RspSeq,          /* Send Response Sequence ID */
     tMS_Tx_RspData,         /* Send Response Data */
     tMS_Tx_Done
  
 } tMsgState;
  
 /*-----------------------------SPI/UART HELPER FUNCTIONS------------------------------------- */
 /*The following helper functions are currently not working, but they demonstrate how our UART/SPI state machine works*/
  
 /* ----------------------------------------------------------------------------
  *   Types
  * ------------------------------------------------------------------------- */
 #define INCOMPLETE_PACKET               0
 #define COMPLETE_NEW_PACKET             1
 #define COMPLETE_REPEATED_PACKET        2
  
 void tuningResetByteEncoderUART(void);
  
 INT32 tuningDecodeByteUART(UINT32 *packetBuffer, UINT8 ch);
  
  INT32 tuningEncodeByteUART(UINT32 *packetBuffer, UINT8 * ch);
  
 //BOOL awe_tuningRxCmdWordSPI(AWEInstance *pAWE, UINT32 word);
  
 //BOOL awe_tuningGetReplyWordSPI(AWEInstance *pAWE, UINT32 * word);
  
 /*-----------------------------END SPI/UART HELPER FUNCTIONS------------------------------------- */
  
 void ComputeCheckSumPublic(UINT32 * pPacketBuffer);
  
 void GenerateInstanceTableReply(UINT32 * pPacketBuffer, UINT32 numInstances, UINT32 * pInstanceTable);
  
 INT32 float_to_fract32(FLOAT32 x);
  
 FLOAT32 fract32_to_float(INT32 x);
  
 INT32 awe_getNextAWBCmd(const UINT32 *pArray, UINT32 arraySize, UINT32 * pErrorOffset, UINT32 *pPacketBuffer);
  
 #ifdef  __cplusplus
 }
 #endif
  
 #endif  // AWECOREUTILS_H

Macros
#define	PACKET_LENGTH_WORDS(x) (x[0]>>16)
	This will determine the length of a packet in words.

#define	PACKET_LENGTH_BYTES(x) ((x[0]>>16) * sizeof(x[0]))
	This will determine the length of a packet in bytes.

#define	PACKET_INSTANCEID(x) (x[0] >> 8) & 0xff
	This will get the instance ID of a packet. More...

#define	PACKET_OPCODE(x) ((INT32)x[0] & 0xffU)
	Get the OPCODE of the packet. More...

#define	AWB_DONE 1
	return value that indicates that the end of the AWB has been reached

#define	AWB_NOT_DONE 0
	return value that indicates that the end of the AWB has been reached and another command should be processed

#define	INCOMPLETE_PACKET 0

#define	COMPLETE_NEW_PACKET 1

#define	COMPLETE_REPEATED_PACKET 2

Functions
void	GenerateInstanceTableReply (UINT32 pPacketBuffer, UINT32 numInstances, UINT32 pInstanceTable)
	Generate an instance table reply for Server based on the arguments. More...

INT32	float_to_fract32 (FLOAT32 x)
	Convert audio data from floating point to Fract32 sample by sample. More...

FLOAT32	fract32_to_float (INT32 x)
	Convert audio data from fract32 to float sample by sample. More...

INT32	awe_getNextAWBCmd (const UINT32 pArray, UINT32 arraySize, UINT32 pErrorOffset, UINT32 *pPacketBuffer)
	Get the next command from an array of AWB commands and write it into a packetBuffer to be processed. More...

Detailed Description

The AWECore Helper Functions File.

Macro Definition Documentation

◆ PACKET_INSTANCEID

#define PACKET_INSTANCEID

(

x

)

(x[0] >> 8) & 0xff

This will get the instance ID of a packet.

Used by the tuning interface to determine the destination of an incoming packet

Examplessingleinstance_simple.c.

◆ PACKET_OPCODE

#define PACKET_OPCODE

(

x

)

((INT32)x[0] & 0xffU)

Get the OPCODE of the packet.

All opcodes are defined in ProxyIDs.h. Required when doing multi instance to detect the GetInstanceTable PFID and send an instanceTable reply.

Examplessingleinstance_simple.c.

Function Documentation

◆ GenerateInstanceTableReply()

void GenerateInstanceTableReply	(	UINT32 *	pPacketBuffer,
		UINT32	numInstances,
		UINT32 *	pInstanceTable
	)

Generate an instance table reply for Server based on the arguments.

Parameters

[out]	pPacketBuffer	pointer to your instance's packet buffer
[in]	numInstances	number of instances on your system
[in]	pInstanceTable	pointer to your instanceID's table

◆ float_to_fract32()

INT32 float_to_fract32

(

FLOAT32

x

)

Convert audio data from floating point to Fract32 sample by sample.

Parameters

[in]

x

The floating point value that you wish to convert

ReturnsThe converted value in fract32 format

ExamplesLinuxApp.c.

◆ fract32_to_float()

FLOAT32 fract32_to_float

(

INT32

x

)

Convert audio data from fract32 to float sample by sample.

Parameters

[in]

x

The fract32 point value that you wish to convert

ReturnsThe converted value as a float

◆ awe_getNextAWBCmd()

INT32 awe_getNextAWBCmd	(	const UINT32 *	pArray,
		UINT32	arraySize,
		UINT32 *	pErrorOffset,
		UINT32 *	pPacketBuffer
	)

Get the next command from an array of AWB commands and write it into a packetBuffer to be processed.

Parameters

[in]	*pArray	The AWB array
[in]	arraySize	The size of the AWB array
[out]	*pErrorOffset	current position in the array (index of command)
[in]	*pPacketBuffer	The packetBuffer to write the next command into.

ReturnsAWB_NOT_DONE if processing of array is not completeAWB_DONE if processing of array is completenegative number if error encountered

AWECoreUtils.h

Macros

Functions

Detailed Description

Macro Definition Documentation

◆ PACKET_INSTANCEID

◆ PACKET_OPCODE

Function Documentation

◆ GenerateInstanceTableReply()

◆ float_to_fract32()

◆ fract32_to_float()

◆ awe_getNextAWBCmd()