Overview

Copies the data at the input pin and stores it in an internal buffer. When triggered, buffer is frozen.

Discussion

The triggered sink module copies the data at the input pin to an internal buffer. The copy operation occurs only when a trigger event is asserted. A trigger event occurs when a value is non-zero either on one of the control pin samples or from the manual_trigger parameter. A control pin can accept an array of integer values. If any value is non-zero data capture is triggered, the buffer becomes filled and the reset parameter becomes zero. In order for data capture to continue (on the next trigger event) the reset parameter must be reset to one. This module is used to capture the value of a wire and make it available to the control code, or to a host processor.

The module supports floating-point values and handles both real and complex data.

Type Definition

typedef struct _ModuleTriggeredSink
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 reset;                                  // Data will remain latched until reset set to 1.
    INT32 ctrl_index;                             // Index of first non-zero element of the ctrl signal. Any non-zero element will trigger a data acquisition.
    INT32 manual_trigger;                         // Trigger data acquisition from Matlab
    FLOAT32* value;                               // Captured values.
} ModuleTriggeredSinkClass;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
reset	int	state	0	1	Unrestricted
ctrl_index	int	state	0	0	Unrestricted
manual_trigger	int	state	0	0	Unrestricted
value	float*	state	0	[32 x 1]	Unrestricted

Pins

Input Pins

Name: Ctrl

Description: Control signal

Data type: int

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real

Name: in

Description: audio input

Data type: float

Channel range: Unrestricted

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real and Complex

MATLAB Usage

File Name: triggered_sink_module.m

 M = triggered_sink_module(NAME)
 Creates a triggered sink (data capture) module for use with the Audio Weaver
 environment. The module captures a block of input data and stores it into
 an internal buffer.  
 
 Arguments:
    NAME - name of the module.

Documentation Hub [PUBLIC]

(8.D.2.4) TriggeredSink