(8.D.2.3) FIRDecimator
Overview
Decimator combining an FIR filter and a downsampler
Discussion
The FIR decimator module implements an FIR filter followed by a downsampler. An efficient polyphase algorithm is used which reduces the processing load. The module operates on multiple channels with all channels sharing the same set of filter coefficients. The filter coefficients are stored in the array coeffs in normal order. Each channel uses a circular buffer of length N+D-1, where D is the decimation factor.
The block size of the input pin must be divisible by the decimation factor D. This condition is checked in the prebuild function. The output block size equals the input block size divided by D. The output sample rate equals the input sample rate divided by D.
The latency through the module in samples is displayed in the Audio Weaver Designer GUI. The underlying FIR processing occurs at the input sampling rate and the latency is the delay in samples at the higher sampling rate.orate downsampling.
Type Definition
typedef struct _ModuleFIRDecimator
{
ModuleInstanceDescriptor instance; // Common Audio Weaver module instance structure
INT32 D; // Downsampling factor.
INT32 N; // Length of the filter.
INT32 stateIndex; // Index of the oldest state variable in the array of state variables.
INT32 stateLen; // Length of the circular buffer used by each channel.
FLOAT32* coeffs; // Filter coefficient array in normal order.
FLOAT32* state; // State variable array. The size of the array equals stateLen*numChannels.
void * hardware_specific_struct_pointer; // Usually NULL, but for optimizations that use 3rd party optimizations (like ne10), this may point to the required instance structure
} ModuleFIRDecimatorClass;
Variables
Properties
Name | Type | Usage | isHidden | Default value | Range | Units |
D | int | const | 0 | 2 | 2:1:512 | Â |
N | int | const | 0 | 32 | 1:1:5000 | samples |
stateIndex | int | state | 1 | 0 | Unrestricted | Â |
stateLen | int | const | 1 | 33 | Unrestricted | Â |
coeffs | float* | parameter | 0 | [32 x 1] | Unrestricted | Â |
state | float* | state | 1 | [33 x 1] | Unrestricted | Â |
hardware_specific_struct_pointer | void * | state | 1 | Â | Unrestricted | Â |
Pins
Input Pins
Name: in
Description: audio input
Data type: float
Channel range: Unrestricted
Block size range: Unrestricted
Sample rate range: Unrestricted
Complex support: Real
Output Pins
Name: out
Description: audio output
Data type: float
MATLAB Usage
File Name: fir_decimator_module.m
M=fir_decimator_module(NAME, D, N)
Implements a decimator module which combines an FIR filter and
a downsampler. An efficient polyphase algorithm is used to
reduce the required computation. The module has a multichannel
input and a multichannel output pin.
Arguments:
NAME - name of the module.
D - decimation factor.
N - length of the filter (number of taps).
Â