Overview

Gain computer used to realize a downward expander (or noise gate)

Discussion

The downward expander core provides a peak amplitude follower and input/output gain transfer function for use in noise gating systems. It is designed to take as its input the output of the AbsModule. The module outputs the time varying fixed point gain in 8.24 format on the mono output pin which is typically used as input to the AGCMultiplierFract32Module. The peak following amplitude detector and the gain transfer function are calculated at the sample rate, which aids in reducing the gain of fast transients.

When the signal is above the threshold the output gain is 0x7FFFFFFF (no change). When the signal is below the threshold, each dB drop in the input causes the output to drop by ratio dB. For instance, a ratio of 1 results in no additional attenuation and a ratio of 11 results in 10dB more attenuation for each dB that the input drops.

The module stores the gain computed for the last sample in the block to the currentGain state variable. This variable can be examined to track the behavior of the expander.

Type Definition

typedef struct _ModuleDownwardExpanderCoreFract32
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    FLOAT32 threshold;                            // Below this level the module reduces gain
    FLOAT32 ratio;                                // Slope of the gain curve when the signal is below the threshold
    FLOAT32 kneeDepth;                            // Knee depth controls the sharpness of the transition between expanding and not expanding
    FLOAT32 attackTime;                           // Envelope detector attack time constant
    FLOAT32 decayTime;                            // Envelope detector decay time constant
    fract32 currentGain;                          // Instantaneous gain computed by the block
    fract32 thresholdFract32;                     // threshold - in 8.24 "base2 dB"
    fract32 ratioMinusOneNegate;                  // -(ratio - 1) - in 8.24 "base2 dB"
    fract32 kneeDepthFract32;                     // kneeDepth - in 8.24 "base2 dB"
    fract32 oneOverKneeDepthFract32;              // 1/kneeDepth - in 1.31 "base2 dB"
    fract32 attackCoeff;                          // Internal derived variable which implements the attackTime
    fract32 decayCoeff;                           // Internal derived variable which implements the decayTime
    fract32 envState;                             // Holds the instantaneous state of the envelope detector
    fract32* kneePoly;                            // Derived variable for interpolating the soft knee
} ModuleDownwardExpanderCoreFract32Class;

Variables

Properties

Name	Type	Usage	isHidden	Default value	Range	Units
threshold	float	parameter	0	-20	-100:0	dB
ratio	float	parameter	0	5	0.1:100	dB/dB
kneeDepth	float	parameter	0	0	0:60	dB
attackTime	float	parameter	0	20	0.01:1000	msec
decayTime	float	parameter	0	100	0.01:1000	msec
currentGain	fract32	state	0	0	Unrestricted
thresholdFract32	fract32	derived	0	-0.002441	Unrestricted
ratioMinusOneNegate	fract32	derived	0	-0.0004883	Unrestricted
kneeDepthFract32	fract32	derived	0	0	Unrestricted
oneOverKneeDepthFract32	fract32	derived	0	0	Unrestricted
attackCoeff	fract32	derived	1	0.001041	Unrestricted
decayCoeff	fract32	derived	1	0.0002083	Unrestricted
envState	fract32	state	1	0	Unrestricted
kneePoly	fract32*	derived	1	[1 x 3]	Unrestricted

Pins

Input Pins

Name: in

Description: audio input

Data type: fract32

Channel range: 1

Block size range: Unrestricted

Sample rate range: Unrestricted

Complex support: Real

Output Pins

Name: out

Description: audio output