Overview
Audio sample interpolator with IIR filter
Discussion
The IIR interpolator module implements an upsampler followed by an IIR low-pass filter. The IIR filter is implemented as an 8th order elliptical filter. The module variable cutoffFreq must be smaller than Fs*0.5/D, where Fs is the sampling rate and D is the interpolation factor.
This module accepts any input block size.
The output block size equals the input block size times the interpolation factor D.
The output sample rate equals the input sample rate times D
Type Definition
-Not Shown-
Variables
Properties
Name | Type | Usage | isHidden | Default value | Range | Units |
cutoffFreq | float | parameter | 0 | 10800 | 20:24000 | Hz |
Rs | float | parameter | 0 | 60 | 10:100 | dB |
L | int | const | 0 | 2 | Unrestricted |
Pins
Input Pins
Name: in
Description: Audio input
...
Sample rate range: Unrestricted
Complex support: Real
Output Pins
Name: out
Description: Audio input
Data type: float
Scratch Pins
Channel count: 1
Block size: 64
...
Block size: 64
Sample rate: 96000
MATLAB Usage
File Name: iir_interpolator_subsystem.m
...