Overview

Decimator combining an FIR filter and a downsampler

Discussion

The FIR decimator module implements an FIR filter followed by a downsampler. An efficient polyphase algorithm is used which reduces the processing load. The module operates on multiple channels with all channels sharing the same set of filter coefficients. The filter coefficients are stored in the array coeffs in normal order. Each channel uses a circular buffer of length N+D-1, where D is the decimation factor.

The block size of the input pin must be divisible by the decimation factor D. This condition is checked in the prebuild function. The output block size equals the input block size divided by D. The output sample rate equals the input sample rate divided by D.

Type Definition

typedef struct _ModuleFIRDecimatorFract32
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 D;                                      // Downsampling factor
    INT32 N;                                      // Length of the filter
    INT32 stateIndex;                             // Index of the oldest state variable in the array of state variables
    INT32 stateLen;                               // Length of the circular buffer used by each channel
    INT32 postShift;                              // Number of bits to shift
    FLOAT32* coeffs;                              // Filter coefficient array in normal order
    fract32* coeffsFract32;                       // Filter Fract32 coefficient array in normal order
    fract32* state;                               // State variable array. The size of the array equals stateLen * numChannels
} ModuleFIRDecimatorFract32Class;

Variables

Properties

Pins

Input Pins

Name: in

Description: audio input

...

Sample rate range: Unrestricted

Complex support: Real

Output Pins

Name: out

Description: audio output

Data type: fract32

MATLAB Usage

File Name: fir_decimator_fract32_module.m

...