Overview

Cascade of second order Biquad filters with different coefficients for each channel

Discussion

A cascade of second order 5 multiply recursive filters. The module is designed to operate on multiple channels and applies the different coefficients on each channel. The state array is allocated to contain 2*numChannels*numStages values. Each 2nd order section implements the difference equation: $y[n]=b_0x[n]+b_1x[n-1]+b_2x[n-2]-a_1y[n-1]-a_2y[n-2].$ The filter coefficients are stored in the matrix .coeffs. This matrix is of dimension (5*numStages) x numChannels and each 5 x numChannels submatrix corresponds to an individual 2nd order Biquad stage. Within each column, the coefficients are ordered as: [b0; b1; b2; a1; a2].

On the ADI SHARC+ platforms, the module make use of IIR Accelerators to optimize the processing time. The processing load is distributed as 1 channel processing in IIRA is equivalent to 2 channel core processing. i.e. the IIRA channels=floor(numChannels/3). As the accelerators access data by DMA, when the dm and pm caches are enabled, extra cycles are needed to maintain cache coherence. It is highly recommended to increase the allocation priority of this module instance in the signal flow to have a larger chance to allocate in the AWE fast heaps. In this way, the overhead from accelerator can be minimized. If any of this module instances allocated in the AWE slow heap, please note that the CPU load might be higher than without IIRA due to cache coherence maintenance. Maximum number of channels that can be processed in IIR Accelerator is limited to 32 and the remaining channels are processed by the core. i.e. IIRA channels=min(floor(numChannels/3), 32)

Type Definition

typedef struct _ModuleBiquadNCascade
{
    ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
    INT32 numStages;                              // Number of stages in the filter. The filter order = 2*numStages.
    FLOAT32* coeffs;                              // Matrix of filter coefficients. The size of the matrix is (5*numStages) x numChannels. Each column contains the variables for a biquad arranged as [b0; b1; b2; a1; a2].
    FLOAT32* state;                               // State variables. 2 per channel.
    void * hardware_specific_struct_pointer;      // Usually NULL, but for optimizations that use 3rd party optimizations (like ne10), this may point to the required instance structure
} ModuleBiquadNCascadeClass;

Variables

Properties

Pins

Input Pins

Name: in

Description: audio input

...

Sample rate range: Unrestricted

Complex support: Real

Output Pins

Name: out

Description: audio output

Data type: float

MATLAB Usage

File Name: biquadn_cascade_module.m

...