Overview
Copies the data at the input pin and stores it in an internal buffer.
Discussion
This module copies the data at the input pin to an internal buffer (value). The copy operation occurs at each block process and thus the data continuously updates. This module is used to store the value of a wire and make it available to the control code, or a host processor. The inspector window shows the data using a plot. In the inspector window, there are two edit boxes for maximum(Ymax) and minimum(Ymin) limits for plotting amplitude. If user gives Ymax less than Ymin then the range [Ymax Ymin] will be automatically set by MATLAB
Type Definition
| Code Block |
|---|
typedef struct _ModuleSinkFract32
{
ModuleInstanceDescriptor instance; // Common Audio Weaver module instance structure
INT32 enable; // To Enable or disable the plotting
fract32* value; // Captured values
FLOAT32* yRange; // Yaxis Range
} ModuleSinkFract32Class; |
Variables
Properties
Name | Type | Usage | isHidden | Default value | Range | Units |
enable | int | parameter | 0 | 0 | Unrestricted | |
value | fract32* | state | 0 | [32 x 1] | Unrestricted | |
yRange | float* | parameter | 0 | [1 x 2] | Unrestricted |
Pins
Input Pins
Name: in
Description: audio input
...
Complex support: Real and Complex
MATLAB Usage
File Name: sink_fract32_module.m
...